Hardwood Floor Installation
Hardwood Floor Installation Tips
Most of us think that because hardwood floors are a rather sensitive and expensive material, we should always seek the help of professionals to get them installed.
Thus, it is comforting to know that with the right tools and the right kind hardwood, it is pretty much a do it yourself endeavor. And because prefinished hardwood floor planks are already available in hardware stores and instructional manuals everywhere, then you really have nothing to worry about.
How do you install hardwood flooring? First, decide whether you want to use oak, maple or cherry, or rustic ash. Oak is the most expensive kind of hardwood material, but it is reputably the best and the sturdiest. If you're working under a particular budget, maple or rustic ash are also okay and will last as long as oak with proper care and maintenance.
Next, prepare the following materials: the hardwood planks, a vapor barrier paper, a pry bar, a hammer, a speed drill and drill bits, a pneumatic flooring pack (which consists of a nail gun, staples, a mallet, a hose, and an air compressor), a staple gun, a tape measure, a chalk line, and, of course, your how-to manual.
It would be wise to study the manual before you go about hammering away so you don't waste time. Some hardware stores already have prepackaged hardwood installation necessities so you can avoid the hassle of looking for each piece. Of course, you shouldn't forget your safety goggles and gloves, as all the drilling and hammering could produce wood dust and can be harmful when inhaled.
Before buying hardwood floor planks, measure the surface where you are going to install them. Order planks that are around 10 to 15 inches bigger to allow room for errors. Expect that your initial attempt will be very challenging, but once you get that first plank in place, the rest should be a breeze.
Get rid of squeaks by tightly nailing the hardwood plank into the subfloor. When cutting, always provide extra space. When you're dealing with hardwood floors, it's best to go over and make the necessary adjustments than be left with a space that would look awkward to fill.
If you got a prefinished hardwood floor, then the job is done after you've installed the planks in place. But if you bought wood in its purest form, you should also pre-equip yourself with sanding and finishing tools and prepare for another challenging task ahead.
More Articles
FREE Videos and Other Resources
More Articles
... setting yourself up to headaches. How do you determine if your hardwood floor needs refinishing? Test on an inconspicuous part of the flooring. Do so by pouring a little water on the surface. If the water seeps in and creates a dark stain, then it's a sign that your coating has faded and you need to refinish ...
... flooring? Should you retile the bathroom? There are so many questions you need to answer. If you've decide to use hardwood flooring for your new apartment, then you have to prepare yourself for a considerable expense. Before you back off at the concept of spending a significant amount for just your floor, ...
... out? Study your floor to see if the finishing has been scraped, dulled, or chipped. You can find out if your finish is worn by spilling a small amount of water at a high-traffic area. If the water beads at the top, then you have nothing to worry about -- the finish is still intact and sealed. But if the water ...
... orbital sander. The orbital sander is said to be easier to use and more reliable, but the drum sander is more commonly available. If buying your own sander is not an option, you can rent it from floor installation specialists, who will also be willing to teach you how to operate it. The best sandpaper for ...
... will make your floor as good as new again. If sticky chewing gum is your problem, then you should ice the deposit first until it becomes brittle enough to crumble off. For hardheaded gums, try pouring floor cleaner around it so it loosens up. Hardwood floors last a lifetime and more if properly maintained ...