Finishing Hardwood Floor
Refinishing Your Hardwood Floor
One of the most practical flooring and building materials is hardwood. It is sturdy enough to last decades and even centuries, with proper care, and it can give an otherwise dull living space an earthy and natural feel.
As time progresses, however, the protective coating of your hardwood floor will inevitably thin out, particularly in areas where there's a lot of foot traffic. When this happens, your best option is to reapply a new finish so that it lasts longer and it becomes a lot easier to clean and maintain.
Why should you refinish your hardwood floor? If your floor has been subjected to constant wear or has been hidden under the carpet for so long, you will need to apply proper maintenance techniques to preserve it.
You may attempt to do the refinishing yourself, but those who have had experience doing this will tell you that it's quite a challenging task. Refinishing your hardwood floor does not simply entail reapplying the translucent coat. You will first have to remove the previous finishing in order to properly and evenly recoat the floor.
Handling sanding equipment can also be a tedious job. Thus, if you're considering refinishing your hardwood floor, it's wise to just leave the dirty work to the professionals and experts on the field. This project requires time and effort, so if you attempt to do this yourself, you could be setting yourself up to headaches.
How do you determine if your hardwood floor needs refinishing? Test on an inconspicuous part of the flooring. Do so by pouring a little water on the surface.
If the water seeps in and creates a dark stain, then it's a sign that your coating has faded and you need to refinish soon. But if it forms small beads, then you have no reason to panic. Your floor coating is still intact. Do the same procedure at different parts of the house, especially areas that experience heavy traffic.
There are also a number of stains you can use to refinish your hardwood floor. But before you decide on which to get, test it first on a hidden part of your house. Remember that refinishing stains look darker when its fresh, but they lighten when they dry up. Also consider the kind of hardwood you have in your house because they react differently to stains.
More Articles
FREE Videos and Other Resources
More Articles
... shown signs of wear, it is likely that the wood has been damaged, too. If you find that the wood has started to decay, then you definitely need to replace the boards. If it's a situation that still can be salvaged, it would be best to just call in professionals, as a do-it-yourself endeavor, especially if ...
... no fear. Instructions on how to lay replacement boards are here. 1) Clear the damaged area of all the nails embedded into it. You can do by positioning a nail set over the nail and driving it down as far as possible using a hammer. The purpose of this is to avoiding having the hammer pound against the wood ...
... furniture would you want to put in? Should you set up a home office? Should you install a chandelier? Do you want to cover up that drab looking concrete floor with hardwood flooring? Should you retile the bathroom? There are so many questions you need to answer. If you've decide to use hardwood flooring for ...
... somewhat expensive. And because they are an investment, it is but prudent to make sure that you get the maximum value for your money as the years progress. Thus, we face the question. How do we take care of our hardwood floors? Consider the tips below. - Avoid too much sun exposure If the room where your hardwood ...
... materials. Sure, concrete is great, but nothing beats a well finished hardwood floor to get that truly natural touch. Having a hardwood floor in your home is an investment, but it is a one-time expenditure. This means you shell out a large amount only once because all you have to do is make sure the floor ...